Voltage Regulator IC

Switching Voltage Regulators CMOS Voltage Converter
The CMOS switched-capacitor voltage converter, model TL7660, converts supply voltage from positive to negative. An input voltage between the ranges of 1.5 V and 10 V is transformed to a corresponding negative output voltage between the ranges of -1.5 V and -10 V with just two noncritical external capacitors required for the charge pump and charge reservoir functions. The gadget can also be used as a voltage doubler, producing output voltages of up to 18.6 V from an input of 10 V.

The L78 series of three-terminal positive regulators is available in TO-220, TO-220FP, D²PAK and DPAK packages and several fixed output voltages, making it useful in a wide range of applications. These regulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type embeds internal current limiting, thermal shut-down and safe area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1 A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents.

78M05  78M15 7905K
7912K  7915K  79L05
79L08  79L09   79L12
79L15  79M12  L200
L293D  L2941  L296
L297    L298N  L4960
L4962  L6203  L6561

KA431 / 78L05 /78L08 /79L05 / 79L09 / 78L06
 
The LM79LXXAC family of three-terminal negative voltage regulators has fixed output voltages of 5V, 12V, and 15V with output current capacities of more than 100mA. These devices were created by utilising cutting-edge computer methodologies to optimise the packed IC thermal/electrical performance.

The TPS54331 device is a non-synchronous, 28-V, 3-A buck converter that incorporates a high-side MOSFET with a low RDS(on). An automatic pulse-skipping Eco-mode feature is engaged to increase efficiency under mild loads. Furthermore, the device can be employed in battery-powered applications thanks to the 1-A shutdown supply-current. The external compensation calculations are made easier and the component count is decreased by using current mode control with internal slope compensation, which also permits the use of ceramic output capacitors. The input undervoltage lockout's hysteresis is controlled by a resistor divider. 

The MCP1603/B/L is a high-efficiency, fully-integrated 500 mA synchronous buck regulator whose 2.7V to 5.5V input voltage range makes it ideally suited for applications powered from 1-cell Li-Ion or 2-cell/3-cell NiMH/NiCd batteries.

Linear Voltage Regulators 1.2-37V Adj Positive 1.5 Amp Output.
We have the entire LM317 series availabe with us.

The TC1264 is a fixed-output, high-accuracy (typically ±0.5%) CMOS low dropout regulator. Designed specifically for battery-operated systems, the TC1264’s CMOS construction eliminates wasted ground current, significantly extending battery life. Total supply current is typically 80 µA at full load (20 to 60 times lower than in bipolar regulators).

Linear Voltage Regulator IC Positive Fixed 1 Output 1A SOT-223-3
A 1000 mA Low Dropout (LDO) linear regulator that offers high current and low output voltages is the MCP1826/MCP1826S. The MCP1826 has an output voltage range of 0.8V to 5.0V and is available with either a fixed or adjustable output voltage. The MCP1826 is a suitable option for new sub-1.8V output voltage LDO applications with large current needs due to its 1000 mA output current capability and low-output voltage capability. It is a 3-pin fixed voltage variant of the MCP1826S.

Low-dropout voltage and ultra-low power operation are advantages of the TPS797xx series of low-dropout voltage regulators (LDOs).With any capacitor bigger than 0.47-F, the gadget is stable. Because of the tiny package and very modest output capacitor, the installation of this device requires relatively minimal board space.The series also has a built-in open drain active high power good (PG) output. The TPS797xxfamily low dropout and ultra-low-power operation result in a notable boost in system battery operational life and are designed for use in microcontroller-based, battery-powered systems.The minimal packing reduces the need for board space.

Established in the year 2016 at Mumbai Maharashtra we Adinath Electronics are a Sole Proprietorship based firm engaged as the foremost Wholesale Supplier and Importer of SMD Resistors PCB Connector etc Our products are high in demand due to their premium quality and affordable prices Furthermore we ensure to timely deliver these products to our clients through this we have gained a huge clients base in the market we are importing our products from Taiwan Singapore and Malaysia

The regulators of the LM2671 series are monolithic integrated circuits made using the LMDMOS technology. These regulators offer all the operational features needed to drive a 500-mA load current with good line and load control. They are step-down (buck) switching regulators.These devices come in fixed output voltages of 3.3V, 5V, and 12V as well as an adjustable output variant.

We deal in all kinds of Linear Voltage Regulators and Switching Voltage Regulators.

The LM2576 series of regulators are monolithic integrated circuits that are perfect for designing a step-down switching regulator quickly and easily (buck converter). This series' circuits are all capable of driving a 3.0A load while maintaining excellent line and load control. These devices come with fixed output voltages of 3.3V, 5.0V, and 12V, as well as an adjustable output option. These regulators were created with the goal of reducing the amount of external components in the power supply architecture. Several inductor manufacturers offer standard series inductors that are tailored for use with the LM2576. The efficiency of the LM2576 converter is much higher than that of typical three-terminal linear regulators, especially at higher input voltages, because it is a switch-mode power supply.In many circumstances, the power dissipated is so minimal that a heatsink is not required, or its size can be drastically decreased. Several different manufacturers offer a standard series of inductors that are optimised for use with the LM2576. This feature makes the design of switch-mode power supply a lot easier. The LM2576 has a guaranteed +/- 4 percent output voltage tolerance within defined input voltages and output load circumstances, as well as a +/-10 percent oscillator frequency tolerance (+/- 2 percent over 0 to 125 C). External shutdown is included, with a standby current of 80A (typical). The output switch has cycle-by-cycle current limiting and thermal shutdown for complete protection in the event of a fault.

This LDO was created with battery-powered applications in mind, where an ultra-low quiescent current is a crucial factor.For use with microprocessors, microcontrollers, and other battery-powered devices, the TPS 782 with ultra-low IQ (500 nA) is suitable. Because of the ultra-low power and tiny packaging, designers may adjust power consumption for certain applications.

The step-down (buck) switching regulators of the LM2596 family of regulators are monolithic integrated circuits that can drive a 3-A load with good line and load control. These devices come with 3.3 V, 5 V, 12 V fixed output voltages as well as an adjustable output version. The LM2596 series operates at a switching frequency of 150 kHz, allowing for fewer filter components than may be necessary with switching regulators operating at lower frequencies. Available in both a 5-pin TO-263 surface mount package and a conventional 5-pin TO-220 packaging with a variety of lead bend choices.

Established in the year 2016 at Mumbai Maharashtra we Adinath Electronics are a Sole Proprietorship based firm engaged as the foremost Wholesale Supplier and Importer of SMD Resistors PCB Connector etc Our products are high in demand due to their premium quality and affordable prices Furthermore we ensure to timely deliver these products to our clients through this we have gained a huge clients base in the market we are importing our products from Taiwan Singapore and Malaysia