Adinath Electronics

We also have the floowing Bridge Rectifiers available with us IN STOCK:
KBPC1510   KBPC2510
KBPC3510

FEATURES
* Good for automation insertion
* Surge overload rating - 30 amperes peak
* Ideal for printed circuit board
* Reliable low cost construction utilizing molded
* Glass passivated device
* Polarity symbols molded on body
* Mounting position: Any
* Weight: 1.0 gram

We have the following products availabe with us:
W10G-E4/51  W08G-E4/51   W04G-E4/51
FEATURES
• UL recognition, file number E54214
• Ideal for printed circuit boards
• Typical IR less than 0.1 μA
• High case dielectric strength
• High surge current capability
• Solder dip 275 °C max. 10 s, per JESD 22-B106

TYPICAL APPLICATIONS
General purpose use in AC/DC bridge full wave rectification for power supply, adapter, charger, lighting ballaster on consumers, and home appliances applications.

The DB207 is a glass passivated, single-phase silicon bridge rectifier. Its voltage and current ranges are 50 to 1000 volts and 2.0 amperes, respectively.
Some of the DB207's characteristics are as follows: 
1 Maximum reverse peak current: 1000 volts
2 Maximum input voltage of the RMS bridge: 700V
3 Maximum voltage used to block DC: 1000V
4 At TA = 40°C, the maximum average forward output current is 2A.
5 Minimal forward voltage drop
6 Abundant current capacity
7 Maximum surge overload rating of 60 amperes
8. Glass-passivated die assembly
9 Capability to handle high surge current

These diodes have been specially designed for high frequency power conditioning systems to minimise losses and EMI/RFI.In most cases, the recovery's softness renders a snubber unnecessary. These devices are best used in applications like HF welding, power converters, and others where switching losses make up a small fraction of the overall losses.

FEATURES 

• Surge overload rating: 200 amperes peak
•  Low forward voltage drop

MECHANICAL DATA

• UL listed the recognized component directory, 
• Epoxy: Device has UL flammability classification 94V-O 
• Lead: Mil-STD-202E method 208C guaranteed
• Mounting position: Any
• Weight: 7.86 grams

We  also have BR457 & BR610 also availale with us in stock

Single Phase Glass Passivated Silicon Bridge Rectifier

Features

• Low forward voltage  
• High surge overload rating
• Ideal for printed circuit boards
• High temperature soldering: 260 C/ 10 s
• Types from 50 V up to 400 V VRRM
• Not ESD Sensitive

The DB107S is a UL94V-0 flammability rated single-phase bridge rectifier. Its high current capabilities and minimal forward voltage loss make it perfect for printed circuit boards. A diode bridge, or circuit with four or more diodes arranged in a bridge form, is what the DB107S is. With this setup, the output polarity is the same for both input polarities. It may operate at up to 1000V at 1A for AC-DC conversion or DC polarity correction.

Single Phase Glass Passivated Silicon Bridge Rectifier
Bridge Rectifiers SI BRIDGE RECT BR-10 50-1KV 6A 800P/560R

Features

• Low forward voltage
• High surge overload rating
• Ideal for printed circuit boards
• High temperature soldering: 260 C/ 10 s
• Types from 600 V up to 1000 V VRRM
• Not ESD Sensitive

Features 1 Quietness 2 Quick changeover for maximum effectiveness 3 Minimal reverse leakage current 4 Trr 35ns 5 Super high voltage FRD Industrial Data 1 Plastic that has been moulded TO 220AC 2 Epoxy flame retardant to UL 94V 0 rating 3 Solderable terminals per MIL STD 202 4 Body mass 2 07 grammes 5 Any mounting location

These cutting edge components are a series created for use in inverters switching power supplies and as free wheeling diodes Features Ultrafast Recovery Time of 35 and 60 Nanoseconds Operating Junction Temperature 175 C 600 V High Voltage Capability ESD Scores Reduced Forward Drop Low Leakage Specification Case Temperature of 150 C Current Derating Specification at Case and Ambient Temperatures AECQ101 Qualified and PPAP Capable SUR8 Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements

All these products are availabe in DIP
MUR1020  MUR1060  MUR110
MUR1100  MUR120    MUR1510
MUR1560  MUR160    MUR1620
MUR1640  MUR1660  MUR180
MUR2040  MUR220

Dual Schottky rectifier with a high voltage that is suitable for switch mode power supply and other power converters In high frequency circuits where low switching losses and low noise are required this device is specifically designed for medium voltage operation The TO 220 3 2 and TO 220F 3 packages for the MBR30100 are both available Applications 1 Rectification of power supply output 2 Power Administration 3 Equipment Features 1 Low Forward Voltage 0 9 V at 25 C 2 High Surge Capability 3 Operating Junction Temperature of 150 C 4 10A per diode leg and 20A total 5 Stress Protection Guard Ring

The cutting edge centre tap ultrafast recovery diode is called VS-HFA30PA60C... Its exceptional mix of features, along with the most recent developments in epitaxial fabrication and sophisticated processing processes, yield performance that is unmatched by any rectifier that has been on the market before. Particularly well-suited for usage as the partner diode for IGBTs and MOSFETs, the VS-HFA30PA60C... has basic ratings of 600 V and 15 A per leg continuous current. The HEXFRED® product line not only has an ultrafast recovery time but also exceptionally low peak recovery current (IRRM) values and no propensity to "snap-off" during the thermodynamic phase of recovery.

We have all the products in SMD M7 DIODE category available at best price
Rectifiers Diode, SMA, 1000V, 1A

FEATURES 1 Available AEC Q101 qualified 2 Low power loss and increased efficiency 3 Overvoltage protection guard ring 4 Ability to handle high surge current 5 E 326243 UL Recognised File 6 Compliant with RoHS 7 According to IEC 61249 2 21 devoid of halogens APPLICATIONS 1 SMPS or switching mode power supply 2 The adapters 3 Monitor 4 Converters from DC to DC 5 TV

The very low forward voltage drop and mild leakage of the 20ETS 20ATS PbF rectifier High Voltage Series have been optimised It is safe to utilise the glass passivation method up to junction temperatures of 150 C These items are intended to be used with Doingter s HPP switches and output rectifiers both of which come in the same package outlines for the devices typical usage in input rectification This product line was created with industrial level specifications

Very low forward voltage drop and mild leakage have been optimised for the 40EPS rectifier series The employed glass passivation method performs dependably at junction temperatures of up to 150 C These items are intended to be used with Doingter s switches and output rectifiers both of which are offered in similar package shapes for typical applications in input rectification

The Schottky Barrier idea is used by the Switch mode Power Rectifier in a large area metal to silicon power diode Modern geometry includes metal overlay contact oxide passivation and epitaxial fabrication ideal for usage as rectifiers in polarity protection diodes free wheeling diodes and extremely low voltage high frequency switching power supply