AMPLIFIER IC

These devices are made up of two separate voltage comparators that can function over a wide range of voltages from a single power supply. Dual-supply operation is also conceivable as long as the voltage difference between the two supplies is between 2 and 36 V and VCC is at least 1.5 V higher than the input common-mode voltage. The supplied voltage has no effect on the current drain. To achieve wired-AND relationships, the outputs can be coupled to other open-collector outputs. The LM193 is rated for temperatures ranging from 55 to 125 degrees Celsius. The LM293 and LM293A are designed to operate at temperatures ranging from 25 to 85 degrees Celsius. The LM393 and LM393A are designed to work in temperatures ranging from 0 to 70 degrees Celsius. The LM2903 has a temperature range of 40°C to 125°C

The ability to operate from a single power supply of 5.0 V to 30 V or ±15 V split supplies, as commonly used with operational amplifiers, makes the LM211/LM311 a truly versatile comparator. Moreover, the inputs of the device can be isolated from system ground while the output can drive loads referenc ed either to ground, the VCC or the VEE supply. This flexibility makes it possible to drive DTL, RTL, TTL, or MOS logic.
The output can also switch voltages to 50 V at currents to 50 mA.

Established in the year 2016 at Mumbai Maharashtra we Adinath Electronics are a Sole Proprietorship based firm engaged as the foremost Wholesale Supplier and Importer of SMD Resistors PCB Connector etc Our products are high in demand due to their premium quality and affordable prices Furthermore we ensure to timely deliver these products to our clients through this we have gained a huge clients base in the market we are importing our products from Taiwan Singapore and Malaysia

The AD8641 AD8642 and AD8643 are low power precision JFET input amplifiers with rail to rail output and very low input bias current Designers may buffer complementary metal oxide semiconductor digital to analog converters CMOS DACs ASICs and other wide output swing devices in single supply systems because to their ability to swing almost rail to rail at the input and rail to rail at the output Even with capacitive loads greater than 500 pF the outputs are steady The AD8641 AD8642 AD8643 are appropriate for multichannel board applications that need to regulate heat using little power Photodiodes ATE reference level drivers battery management and industrial controllers are further uses

The OP200 is the first monolithic dual operational amplifier with precise performance comparable to that of the OP77. The OP200, which is available in the conventional 8-lead pinout, combines precise performance with the room and money savings provided by a twin amplifier.

Established in the year 2016 at Mumbai Maharashtra we Adinath Electronics are a Sole Proprietorship based firm engaged as the foremost Wholesale Supplier and Importer of SMD Resistors PCB Connector etc Our products are high in demand due to their premium quality and affordable prices Furthermore we ensure to timely deliver these products to our clients through this we have gained a huge clients base in the market we are importing our products from Taiwan Singapore and Malaysia

We have the entire LM324 series availabe in ready stock.
These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages. 

The CA3080 and CA3080A types have differential input and a single-ended, push-pull, class A output. In addition, these types have an amplifier bias input which may be used either for gating or for linear gain control. These types also have a high output impedance and their transconductance (gM) is directly proportional to the amplifier bias current (IABC). The CA3080 and CA3080A types are notable for their excellent slew rate (50V/µs), which makes them especially useful for multiplexer and fast unity-gain voltage followers. These types are especially applicable for multiplexer applications because power is consumed only when the devices are in the “ON” channel state

The IRS2092 is a Class D audio amplifier driver with PWM modulator and protection that operates at high voltage and performance levels. A protected Class D audio amplifier may be created by combining two external MOSFETs with a few other external parts.   One compact silicon die can house both a high current gate drive stage and a high speed low noise error amplifier thanks to International Rectifier's patented noise isolation technology.  Flexible PWM topology implementation is made possible by open PWM modulator section components. 

The 5532 is a dual high-performance low noise operation al amplifier.Compared to most of the s tandard operational amplifiers, such as the 1458, it shows better noise perfor mance, improved output drive capability and considerably higher small-signal and power bandwidths.
This makes the device especially suitable for application in high-quality and professional audio equipment, instrumentation and control circuits, and telephone channel amplifiers.

We have the entire LM358 series availabe in ready stock.
The LM358B and LM2904B devices are the next-generation versions of the industry-standard operational amplifiers (op amps) LM358 and LM2904, which include two high-voltage (36 V) op amps. These devices provide outstanding value for costsensitive applications, with features including low offset (300 µV, typical), common-mode input range to ground, and high differential input voltage capability

The TL072, TL072A, and TL072B are monolithic integrated circuits that combine well-matched, high-voltage JFET and bipolar transistors in high speed JFET input dual operational amplifiers. The components have low offset voltage temperature coefficients, low input bias, low offset current, and high slew rates. 

We deal in all kinds of Amplifier ICs like Operational Amplifier IC, Instrumentation IC, Precision IC, Power Amplifier IC, Etc.

The general-purpose operational amplifiers of the LM741 family perform better than industry standards like the LM709.In most applications, they serve as straight plug-in replacements for the 709C, LM201, MC1439, and 748. The amplifiers include a number of features that make their use practically failsafe, including protection against overload on the input and output, no latch-up when the common mode range is exceeded, as well as independence from oscillations.

Established in the year 2016 at Mumbai Maharashtra we Adinath Electronics are a Sole Proprietorship based firm engaged as the foremost Wholesale Supplier and Importer of SMD Resistors PCB Connector etc Our products are high in demand due to their premium quality and affordable prices Furthermore we ensure to timely deliver these products to our clients through this we have gained a huge clients base in the market we are importing our products from Taiwan Singapore and Malaysia

The Pentawatt package TDA2030 is a monolithic integrated circuit that is designed to be used as a low frequency class AB amplifier It typically produces 14 W of output power d 0 5 at a voltage of 14 V 4 The guaranteed output power at 14 V or 28 V is 12 W on a 4 load and 8 W on an 8 DIN45500 Additionally the system includes a mechanism for automatically regulating the dissipated power in order to maintain the operating point of the output transistors within their safe operating range This method is unique and patent pending There is also a traditional thermal shutdown system included

The TL07xH TL071H TL072H and TL074H family of devices are the TL07x TL071 TL072 and TL074 devices next generation iterations With features like low offset 1 mV typically high slew rate 20 V s and common mode input to the positive supply these devices provide exceptional value for applications with limited budgets The TL07xH devices may be utilised in the most demanding and tough applications thanks to its high ESD 1 5 kV HBM inbuilt EMI and RF filters and operation across the whole temperature range of 40 C to 125 C

The TL08xH TL081H TL082H and TL084H family of devices are the TL08x TL081 TL082 and TL084 devices next generation iterations With features like low offset 1 mV typically high slew rate 20 V s and common mode input to the positive supply these devices provide exceptional value for applications with limited budgets The TL08xH devices may be utilised in the most demanding and robust applications because to its high ESD 1 5 kV HBM inbuilt EMI and RF filters and functioning across the whole temperature range of 40 C to 125 C

These devices are operational amplifiers with JFET inputs that are low cost fast and have extremely low input offset voltage and input offset voltage drift They have a high gain bandwidth product low supply current need and quick slew rate Furthermore properly matched high voltage JFET input devices offer extremely low input bias and offset currents Because the LF412 N dual and the LM1558 share pins designers may quickly improve the overall performance of current systems These amplifiers may be utilised in a variety of circuits that need low input offset voltage and drift low input bias current high input impedance high slew rate and broad bandwidth including high speed integrators quick D A converters sample and hold circuits and many more

Gate protected MOSFET PMOS transistors are used in the input circuit of the CA3140A and CA3140 BiMOS operational amplifiers to offer extremely high input impedance extremely low input current and high speed performance The supply voltage range for the CA3140A and CA3140 single or dual supply is 4V to 36V These operational amplifiers feature access terminals for an extra external capacitor if more frequency roll off is necessary and they are intrinsically phase corrected to provide stable performance in unity gain follower operation Additionally terminals are offered for use in applications that call for the nulling of input offset voltage An significant feature for single supply applications is the common mode input voltage capability down to 0 5V below the negative supply terminal which is made possible by the use of PMOS field effect transistors in the input stage

The AD8541/AD8542/AD8544 are single-supply amplifiers with single rail-to-rail input and output, very low supply current, and 1 MHz bandwidth. All are guaranteed to work with both a 2.7 V and a 5 V single supply. These components have a low current requirement of 45 A per amplifier while offering 1 MHz bandwidth.  The AD8541/AD8542/AD8544 can be utilised for integrators, photodiode amplifiers, piezoelectric sensors, and other high source impedance applications because of its extremely low input bias currents. For battery operation, the supply current of only 45 A per amplifier is ideal.