LED DISPLAY

This 14.22-mm (0.56-in.) LED seven-segment display uses industry-standard size package and pinout. The device is available in either common anode or common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red, and Yellow. The displays are suitable for indoor use.

Features

•  Industry standard size.
• Industry standard pinout 14.22-mm (0.56-in.) DIP lead on 2.54 mm. 
• Choice of colors High Efficiency Red (HER), Green, AlGaAs Red, and Yellow. 
• Excellent appearance Evenly lighted segments package gives optimum contrast ± 50° viewing angle.
•  Design flexibility Common anode or common cathode Single digit Right-hand decimal point.
• Categorized for luminous intensity Green and yellow categorized for color 

Applications

•  Suitable for indoor use.
•  Not recommended for industrial application, that is, operating temperature requirements exceeding +85°C or below –25°C (for additional details, contact your local Broadcom® sales office or an authorized distributor).
•  Extreme temperature cycling not recommended

We have a variety of colours availabe in 3mm DIP LED.
We also have full stock of 8mm DIP LED 
With all colours available 

It is a 3mm DIP LED. An LED is a two-lead semiconductor light source, which emits lights when activated. When an appropriate voltage is applied to the LED terminal, then the electrons are able to recombine with the electron holes within the device and release energy in the form of photons. This effect is known as electroluminescence. The color of the LED is determined by the energy bandgap of the semiconductor.

A light source made of semiconductors is called a green light-emitting diode (LED). Many gadgets employ LEDs as indicator lamps, and they are also being used more and more for other types of illumination. It emits green light and has an appearance similar to a green led.
The series is specifically made for uses where greater brightness is required. There are several hues and intensities of the LED bulbs.
They are employed in several applications, including
TV monitor, phone, PC, and project panel for indicators

With a red diffused lens, through-hole mounting, a round lens, 9.8mcd luminous intensity, 625nm peak wavelength, and a 76° viewing angle, the 3mm HE red LED lamp. Using GaAsP on GaP, this circular LED was created.Range of operation: -40 to +85°C; power dissipation: 85mW

A light source made of semiconductors is called a yellow light-emitting diode (LED). Many gadgets employ LEDs as indicator lamps, and they are also being used more and more for other types of illumination. It illuminates yellow light and has a yellow led-like appearance.
The series is specifically made for uses where more brightness is required. There are several hues and intensities of the LED bulbs.

They are employed in several applications, including
Television set
Observe
Cell phone
System
Panel of Project Indicators

A light source made of semiconductors is called a blue light-emitting diode (LED). Many gadgets employ LEDs as indicator lamps, and they are also being used more and more for other types of illumination. It emits blue light and has an appearance similar to a blue led.
The series is specifically made for uses where more brightness is required. There are several hues and intensities of the LED bulbs.
They are employed in several applications, including
TV monitor, phone, PC, and project panel for indicators

AlInGaP chip-based 1206 monochromatic SMD LED with a water-clear lens. Keypads for mobile and portable devices, indoor and outdoor message boards, flat backlights for LCDs, switches, and symbols, traffic and industrial control system displays, miniature colour effects, and pedestrian markings are all good uses for it.

This is an Everlight / Matelight 1206 BLUE SMD LED, 515nm, 25mA, 180mcd. Because these SMD LEDs are so much smaller than lead frame type components, they may be used with smaller equipment and boards. Their small size makes them perfect for small-scale applications.

This surface-mount LED is yellow. When turned on, an LED is a semiconductor light source with two leads that produces light. Electroluminescence is the word for the phenomenon that occurs when a suitable voltage is supplied to the LED terminal, causing the electrons to recombine with the electron holes inside the device and release energy in the form of photons. The LED's colour is determined by the semiconductor's energy bandgap.
These days, a growing number of enthusiasts are utilising surface mount technology. Hot air and hotplate reflow ovens are among the inexpensive techniques that hobbyists in electronics are using to reduce the size of their projects to unprecedented levels of mobility.