Adinath Electronics

We have all the Products of 3590S Precision Potentiometers availabe with us
1K  2K  5K  10K  100K all are availabe.
Standard Resistance Range of 3590S is 200 to 100 K ohms
3590S has a Total Resistance Tolerance of ±5 %
Absolute Minimum Resistance is 1 ohm or 0.1 % maximum (whichever is greater) of 3590S. 3590S has the Operating Temperature Range of around -40 °C to +125 °C . Moisture Sensitivity Level is of 1 for 3590S.

We have the entire series of 3296W trimpots in stock which includes 1K  2K  5K  10K 100K  ohms 

We have the 3386P Trimpot Potentiometer availabe in the following resistance capacity:
10 Ohms 20 Ohms 22 Ohms 25 Ohms 50 Ohms 100 Ohms 200 Ohms 220 Ohms 250 Ohms 300 Ohms 470 Ohms 500 Ohms 1 kOhms 2 kOhms 2.2 kOhms 2.5 kOhms 4.7 kOhms 5 kOhms 10 kOhms 15 kOhms 20 kOhms 22 kOhms 25 kOhms 47 kOhms 50 kOhms 100 kOhms 200 kOhms 220 kOhms 250 kOhms 330 kOhms 470 kOhms 500 kOhms 550 kOhms 560 kOhms 1 MOhms 2 MOhms 5 MOhms 500 MOhms 

Rm065 is a carbon film potentiometer.
Rm065 is a 6mm, Single-Turn, Carbon Film potentiometer.
There is  open frame and pc board standoffs in Rm065.
Rm065 is also protected by an enclosed cover.

Standard Resistance Range of Rm065 is from 10 to 1M ohm

Resistance Toleranceof Rm065 is ±30%
Rm065's Contact Resistance Variation - R<1K ohm: 30 ohm max. R>1K ohm: 3% max.
Resolution of Rm065 is  Infinite
Rotational Angle of Rm065 is between 210°± 20°
Resistance Taper of Rm065 is Linear (B)

Evironmental Charactersitics of Rm065 at          0.1W (at 50???)
Max Operating Voltage of Rm065 is: 50V/DC (100-500K ohm) & 25V/DC (>500K ohm)
Rm065 has the operating temperature of: -10??? to +70???
Rotational Life of Rm065 on average is 20 ±2 cycles

PHYSICAL CHARACTERISTICS of RM065
Rotational Torque of Rm065  is 20-250 g-cm
Rm065 has a stop strength of >350g-cm 
Terminals of Rm065 consists of soldering pins
Rm065 has a marking of resistance code 


STANDARD RESISTANCE TABLE of RM065
Resistance (Ohms)   Resistance Code
100                            101
200                            201
500                            501
1,000                         102
2,000                         202
5,000                         502
10,000                       103
20,000                       203
50,000                       505
100,000                     104
200,000                     204
500,000                     504
1,000,000                  105

We have the entire series of 3006P available with us which includes 
1K  2K  5K  10K  100K Ohms 

A resistor ladder integrated circuit or a digital-to-analog converter can be used to build a digital potentiometer, albeit the latter design is more frequently used. Each level on the resistor ladder includes a switch that allows it to be connected to the potentiometer's output terminal.